Steps to Assemble Tinydabba Standee
1) Open the Box: Carefully open the box that your Tinydabba standee came in.
2) Take Out the Standee: Gently lift the standee out of the box.
Find the Nut and Screw: Look for a small nut and screw, they should be included with your standee.
3) Put the Nut in the Hole: There's a hole at the bottom of the standee. Put the nut into this hole.
4) Put the Screw in Too: There's another hole where the screw goes. Line it up and put the screw in.
5) Tighten by Hand: Turn the screw with your fingers until it feels tight and the standee doesn't wobble. No tools needed!
All Done!: Your Tinydabba standee is ready to be displayed
2) Take Out the Standee: Gently lift the standee out of the box.
Find the Nut and Screw: Look for a small nut and screw, they should be included with your standee.
3) Put the Nut in the Hole: There's a hole at the bottom of the standee. Put the nut into this hole.
4) Put the Screw in Too: There's another hole where the screw goes. Line it up and put the screw in.
5) Tighten by Hand: Turn the screw with your fingers until it feels tight and the standee doesn't wobble. No tools needed!
All Done!: Your Tinydabba standee is ready to be displayed